Future Workers Training (FWT) – Diploma Holders

Non Destructive Testing (NDT) - Level 2

Durations : 6 Months (2 Months at KISMEC + 4 Months Industries)
Course Code :MC 1224-B
Course Fees :Ditaja Sepenuhnya oleh Perbadanan Tabung Pembangunan Kemahiran (PTPK)
 
Certification: CSWIP (Certification Scheme for Welding Inspection Personnel) of TWI
 
Course Objective :
-To enhance skills and knowledge with worldwide recognized certification
-To develop new skills to meet industries need
-To increase prospect in employability and effectiveness in order to compete globally
 
Course Content :
1. PT (CSWIP) – Level 2
2. MT (CSWIP) – Level 2
3. RI (Course Only) – Level 2
4. UT (Course Only) – Level 2
 
Benefit/Career Opportunity:     

NDT inspections are an integral part of the oil and gas and petrochemical industries, along with several other industries, including chemicals, aerospace, automotive, and defense. The overall goal of all these industries is to detect flaws in components to reduce failure and increase reliability.

Entry Requirement :     

  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Mechanical, Aerospace, Welding, Maritime, Technical and related Science’s field.

For Information or Inquiry, Please Call:        
Puan Syazana & Mr Bazil Bahrin
04-4423271 / 04-4403146

Program Registration

Electrical Maintenance and Management (PTPK)

Programme Duration : 6 months ( 3 months at KISMEC + 3 months OJT )
Programme Code : EE-73-B
Course Fee : Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certificate in Fundamental of Energy Management – VDT Venture KISMEC
Course Overview
  • This course is aimed at producing unemployed graduates with competency in electrical maintenance and troubleshooting. This programme would equip participants with the required skills in electrical management, electrical measurements, electrical Act, safety law and energy management.
Course content
  1. Electrical Act / MS IEC 60364/ Safety Act
  2. Occupational safety
  3. Low Voltage & High Voltage Installation
  4. Motor Control
  5. Test & measuring equipment
  6. Three Phase Distribution Board Installation
  7. Street Lighting system
  8. Single & Three Phase wiring installation
  9. Under ground cable
  10. Solar of – grid system
  11. Air conditioning system
  12. Main Switch Board (MSB)
  13. Electrical Power management
  14. Energy conservation
Benefit/Career Opportunity
  • After completing this course, students will be able work at Electrical Engineer, Electrica Asst. Engineer, Electrical Supervisor and Electrical Contractor
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Electrical or Electronics field

For Information or questions please call :
Electrical Department : 04-441 4619        ext : 119
Mr. Suhaimi : suhaimi@kismec.org.my
Mrs. Amyilia : amylia@kismec.org.my

Program Registration

Design of Automation Equipment Program

Programme Duration : 12 months (6 months at KISMEC + 6 months OJT)
Programme Code : MC-1211-B
Course Fee : Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by KISMEC
Course Overview
  • This course will provide students with the required knowledge for the design, installation, operation and maintenance of automation equipment used in industries. Industrial Automation is used especially in high end factories for various control processes with minimal or reduced human intervention. Various automation topics such as PLC, hydraulic, pneumatic and control system are covered to develop students with relevant skills and talents for high end factory requirement.
Course content
  1. Programmable Logic Control (PLC) system hardware
  2. Programmable Logic Control (PLC) system programming
  3. Industrial Mechanical & Electrical diagram
  4. Advance Hydraulic and Electro hydraulic system
  5. Advance Pneumatic and Electro Pneumatics
  6. Development and Maintenance of control system
  7. System trouble shooting
Benefit/Career Opportunity
  • After completing this course, students will be able work at Sales & Service Engineer, Design & Development and Maintenance technician
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Mechatronics, Electrical, Electronics, Mechanical, & Civil Engineering

For Information or questions please call :
Automation Department : 04-403 3978 (KISMEC Kulim)
Mr. Mahadzir : mahadzir72@gmail.com

Program Registration

Network Security Professional

Programme Duration : 6 months (3 months at KISMEC + 3 months OJT)
Programme Code : EE-710-B
Course Fee : 
Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by KISMEC and Cyber Security Malaysia will be provided to participants who have successfully completed the programme
Course Overview
  • This course provides the fundamental knowledge you need to analyze risks to your networks and systems. You learn the steps to take in order to select and deploy the appropriate countermeasures to reduce your exposure to network threats.
Course content
  • – Introduction To Network Security
  • – Concept of Security
  • – PC Maintenance
  • – TCP/IP
  • – Basic Network Communication
  • – Introduction To Wireless Hacking
  • – Router & Wireless Configuration
  • – Web Hacking Technique
  • – Metasploit
  • – Prevention
  • – Cyber Handler Essential & Policy
  • – Encryption & Decryption
  • – Linux
  • – Windows 2008 Server
  • – Antivirus & Firewall
  • – VMWare
  • – Virtual Box
  • – Wireless Security
  • – Desktop Security
  • – Project Network
Benefit/Career Opportunity
  • After completing this course, students will be able work at many networking companies as a network engineer or network technician to support and maintain their IT infrastructure
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Information Technology, Computer Sciences, Multimedia and related

For Information or questions please call :
IT Department : 04-441 4619        ext : 129
Mrs. Hidayah : hidayah@kismec.org.my
Ms. Azwin : azwin@kismec.org.my

Program Registration

Wireless and Data Communication

Programme Duration : 8 months ( 4 months at KISMEC + 4 months OJT )
Programme Code : EE-723-B
Course Fee : 
Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by KISMEC and Fluke Network will be provided to participants who have successfully completed the programme
Course Overview
  • The course covers how industry classifies wireless data communications today and looks at the advantages and disadvantages of various data communication systems. Cellular technology, antennas, base station and telephone switches are introduced.
Course content
  • – Introduction to Basic Communications
  • – Fundamental of TCP/IP
  • – PC Maintenance
  • – TCP/IP & IP Addressing
  • – Basic Network Communication
  • – Introduction To Wireless Hacking
  • – Router & Wireless Configuration
  • – Structured Cabling
  • – Linux
  • – Antivirus & Firewall
  • – Wireless Security
  • – Networking
  • – Certified Cabling Test Technician
  • – Windows 2008 Server
  • – CCTV Configuration
  • – Network Management & Troubleshooting
Benefit/Career Opportunity
  • After completing this course, students will be able work at many networking companies as a network engineer or network technician to support and maintain their IT infrastructure
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Information Technology, Computer Sciences, Electronic Engineering, Electronic Computer and related

For Information or questions please call :
IT Department : 04-441 4619       ext : 129
Mrs. Hidayah : hidayah@kismec.org.my
Ms. Azwin : azwin@kismec.org.my

Program Registration

Automotive Assembly Operation

Programme Duration : 10 months (3 months at KISMEC + 7 months OJT)
Programme Code : TP-022-B
Course Fee : Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by KISMEC and MAI (Malaysia Automotive Institute) will be provided to participants who have successfully completed the programme
Course Overview
  • This module course is designed to expose participants to the principles of Automotive Assembly Operations covering Body Assembly, Painting and Final Assembly operations. It covers issues production scheduling, shop floor control, parts supply system, inventory control, budgetary control and also computerized manufacturing system such as Manufacturing Requirement Planning (MRP), and Enterprise Resources Planning (ERP). It also introduces the basic lean concept which is part of the world class automotive manufacturing system.
Course content
  1. Objectives and elements of Production Planning and Control
  2. Master Production Scheduling and Shop Floor Control (MPS and SFC)
  3. Bills of Materials and Materials Requirement Planning (BOM and MRP)
  4. Introduction to Cost Control – budgetary planning and control
  5. Manufacturing Engineering techniques – Layout, Process Flow/Charts, Materials Handling and Automation
  6. Logistics and Supply Chain Management in Automotive Assembly Operations
  7. Just in time and Lean Manufacturing
  8. Introduction to Product Design and Development
Benefit/Career Opportunity
  1. Understand basic overview of developing a new vehicle and outline of all phases and approval points of the product design & development processes
  2. Analyse key selected tools and techniques that are used to ensure the scope, timing and budget elements are managed along with setting the quality targets
  3. Understand the Original Equipment Manufacturers (OEM) roles, various types of suppliers, individuals that perform the product development tasks and how they are managed to ensure compliance to the programs scope, time, budget and quality targets required for the vehicles targeted to a specific market
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in management or technical.

For Information or questions please call :
Automotive Department : 04-441 4619      ext. : 123
Mr. Zul : zulfauzi@kismec.org.my
Mrs. Syakirin : nursyakirin@kismec.org.my

Program Registration

Industrial Plastic Product and Mould Design

Programme Duration : 10 months ( 4 months at KISMEC + 6 months OJT )
Programme Code : MC-1213-B
Course Fee : 
Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by by KISMEC and INVENTOR (Basic & Advance Tooling) will be provided to participants who have successfully completed the programme
Course Overview
  • This course provides participants a knowledge of plastics technology, mould design and mould making, plastic products quality and products testing.
Course content
  1. Safety at workplace
  2. Fundamentals of plastics technology
  3. Plastics technology process
  4. Plastics product and quality
  5. Plastic product testing
  6. Mould design and making
  7. Plastics product design using softwares
  8. Product prototyping
Benefit/Career Opportunity
  • After completing this course, students will be able work at many companies as a technician , engineer and designer in the relevant industries
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Mechanical, Polymer Technology, Tool & Die and others

For Information or questions please call :
Polymer Department : 04-441 4619        ext : 121
Mr. Aris Omar : aris@kismec.org.my
Ms. Nuraqilah : nuraqilah@kismec.org.my

Program Registration

Safety and Health Officer

Programme Duration : 6 months (3 months at KISMEC + 3 months OJT)
Programme Code : BC-23-B-1
Course Fee : 
Fully sponsored by Perbadanan Tabung Pembangunan Kemahiran (PTPK)

Certification
  • Certification by KISMEC and The National Institute for Occupational Safety and Health (NIOSH).
Course Overview
  • The primary objective of the Safety Officer and Coordinator Course is to provide an entry level awareness course for those new to the coordination of health and safety. The programme will give participants an understanding of the key areas of occupational health and safety (OHS) legislation and guidance.
Course content
  • – Risk Assessment and Management
  • – Emergency Preparedness and Response
  • – PPE – Personal Protective Equipment
  • – Factories and Machinery Act 1967
  • – Employment Act 1955
  • – Chemical Health Risk Assessment
  • – Occupational Health Standard
  • – Ergonomic Risk Factors
  • – Occupational and Psychological Stress
  • – Safe Machine Operation
  • – Electrical Safety
  • – Fire Safety
Benefit/Career Opportunity
  • After completing this course, students will be able work at Safety Engineers, Safety and Occupational Health Specialists, Industrial Hygienists, Safety Adviser, Safety inspectors/Specialists and others
Entry Requirement
  1. Warganegara Malaysia
  2. Age not more than 35 years
  3. Fresh graduates with a diploma in Mechanical, Civil Engineering and others

For Information or questions please call :
Safety Department : 04-441 4619       ext : 122
Mr. Hisham Ahmad : hisham@kismec.org.my
Ms. Badriah : badriah@kismec.org.my

Program Registration